Determine the Cost of Compressed Air for Your Plant

Program Areas

Past Events

Face-To-Face Meetings

Online Collaboration

Written by USDOE Office of Industrial Technologies

Wednesday, 09 June 2010 11:09

Determine the Cost of Compressed Air for Your Plant

Most industrial facilities need some form of compressed air, whether for running a simple air tool or for more complicated tasks such as the operation of pneumatic controls. A recent survey by the U.S. Department of Energy showed that for a typical industrial facility, approximately 10% of the electricity consumed is for generating compressed air. For some facilities, compressed air generation may account for 30% or more of the electricity consumed. Compressed air is an on-site generated utility. Very often, the cost of generation is not known; however, some companies use a value of 18-30 cents per 1,000 cubic feet of air.

Compressed air is one of the most expensive sources of energy in a plant. The overall efficiency of a typical compressed air system can be as low as 10%-15%. For example, to operate a 1-horsepower (hp) air motor at 100 pounds per square inch gauge (psig), approximately 7-8 hp of electrical power is supplied to the air compressor. To calculate the cost of compressed air in your facility, use the formula shown below:

Cost ($) = ((bhp) x (0.746) x (# of operating hours) x ($/kWh) x (% time) x (% full-load bhp)) / Motor Efficiency

Where:
bhp—Motor full-load horsepower (frequently higher than the motor nameplate horsepower—check equipment specification)
0.746—conversion between hp and kW
Percent time—percentage of time running at this operating level
Percent full-load bhp—bhp as percentage of full-load bhp at this operating level
Motor efficiency—motor efficiency at this operating level

Example
A typical manufacturing facility has a 200-hp compressor (which requires 215 bhp) that operates for 6800 hours annually. It is fully loaded 85% of the time (motor efficiency = .95) and unloaded the rest of the time (25% full-load bhp and motor efficiency = .90). The aggregate electric rate is $0.05/kWh.

Cost when fully loaded
= ((215 bhp) x (0.746) x (6800 hrs) x ($0.05/kWh) x (0.85) x (1.0)) / .95
= $48,792
Cost when unloaded
= ((215 bhp) x (0.746) x (6800 hrs) x ($0.05/kWh) x (0.15) x (0.25)) / .90
= $2,272

Annual energy cost = $48,792 + $2,272 = $51,064

Typical Lifetime Compressed Air Costs in Perspective—Costs Over 10 Years

Electricity - 76%

Maintenance- 12%

Equipment- 12%

Assumptions in this example include a 75-hp compressor operated two shifts a day, 5 days a week at an aggregate electric rate of $0.05/kWh over 10 years of equipment life.

FOR ADDITIONAL INFORMATION, PLEASE CONTACT:
EERE Information Center 1-877-EERE-INF (1-877-337-3463) www.eere.energy.gov
Industrial Technologies Program Energy Efficiency and Renewable Energy U.S. Department of Energy
Washington, DC 20585-0121 www.eere.energy.gov/industry

Add comment

Stabilizing System Pressure
09/06/2010 | USDOE Office of Industrial Technologies

Stabilizing System Pressure
Stabilizing system pressure is an important way to lower energy costs and maintain reliable production and product quality. The need to stabilize system pressure should be [ ... ]

+ Full Article

Clean Boiler Waterside Heat Transfer Surfaces
01/07/2010 | USDOE Office of Industrial Technologies

Clean Boiler Waterside Heat Transfer Surfaces Even on small boilers, the prevention of scale formation can produce substantial energy savings. Scale deposits occur when calcium, magnesium, and silica [ ... ]

+ Full Article